There are few things more frustrating than dealing with plumbing problems, especially if they happen at an inopportune time. Luckily, there are a few basic tips that will help you tackle almost any plumbing issue. You don’t need to be a professional plumber to deal with basic plumbing problems; with the right tools and a bit of know-how, you can tackle most issues efficiently. From clearing clogged drains to replacing broken pipes, these simple tips and tricks will ensure that your home’s plumbing stays in working order for many more years to come.Keep reading to learn more about these common plumbing tips and tricks.

Change your water filter regularly

Water quality can be affected by the quality of the water being used in your home. If you’re on a municipal water system, you can have your water tested to see what kind of quality you’re receiving. If the water isn’t of high quality, it can contribute to a host of plumbing issues. If you have a water filter installed in your home, it’s a good idea to change it once a year. If you use a private well, this is even more important. If you have hard water in your home, you’ll want to use a water softener; these can be a helpful addition to your home’s plumbing system.

Don’t flush anything that isn’t biodegradable

This is a common problem that can lead to a clogged sewer pipe or septic tank. Anything you put down your toilet that isn’t biodegradable may not break down quickly enough to be discharged from your plumbing system properly. This can end up clogging your drains or your septic tank, resulting in costly repairs. Make sure that you only put biodegradable items (read: toilet paper, paper towels, tampons, etc.) down your toilet. Anything else can clog your pipes and cause a backup.

Know where your water shut-off is

This is especially important if you run into any problems with your local water supply. If you’re not sure where your water shut-off is, it’s a good idea to find it before any plumbing issues arise. If it’s just a couple of turns of the water main from your home, you don’t want to risk a flood; if it’s a long way away, you’ll have enough time to call a plumber. If you’re not sure where your shut-off is, ask any neighbours you know if they know where it is. Make sure you mark it with a permanent marker so you don’t forget where it is in the future.

Don’t use a plunger to clear your drains

If you’re dealing with a clogged toilet or an issue with another clogged plumbing fixture, it’s best to avoid using a plunger. This will force sewage and debris back into the plumbing system. This can cause a backup and cause costly repairs, as well as create a stinky, smelly smell in your home. If you have a clogged toilet, it’s best to call a plumber to unclog it. If you have a clogged shower or a clogged sink, you can try using a snake, but only with the assistance of a plumber. It’s also a good idea to clean out your pipes once a year, so make sure you’re prepared for whatever comes your way.

Watch out for leaks and drips

Water leaking from a pipe can cause a lot of damage. It can cause mold and lead to expensive repairs. It’s best to catch a leaking pipe as soon as possible, but you can also keep an eye out for some common signs of a leaky pipe. If you see a small amount of water on the floor or if you hear a drip, this could be a sign that you have a leak. Before you call a plumber, though, try to locate the leak and try to fix it yourself. You can try using some tape to cover the pipe, or you can use roofing nails to plug up the hole. Be sure to seal the edges with caulk so it doesn’t look messy.

Bottom line

There are a lot of common plumbing tips you should know before tackling a plumbing issue. If you know these tips, you can be prepared for any plumbing situation. From knowing what to do in the event of a plumbing emergency to knowing how to change a water filter, these tips will come in handy when your pipes are throwing a tantrum. Stay on top of things and your plumbing system will serve you for many years to come.

Frequently Asked Question

  • Give your pipes a good cleaning once a month. Hair, grease, and other gunk build up in drains over time
  • Fix recurring problems
  • Block debris from entering pipes
  • Flush your drains regularly
  • Don't dump grease down the drain
  • Give your garbage disposal a rest
  • Don't throw things down the toilet
It's always a good idea to take care of your plumbing before a problem happens because a plumbing problem can turn into an emergency very quickly. You should have your plumbing pipes cleaned every 18 to 22 months or so.
The most common plumbing problems are clogged drains and toilets, leaky faucets and pipes, water heater issues, low water pressure, and a running toilet.
A good general rule is to have your home's sewer lines cleaned out every 18 to 22 months. That may be difficult to remember, but think of it as a year and a half to slightly less than two years.
One of the most common issues with a heating system not functioning is dirty air filters. If your air filters are extremely dirty, then the airflow can be blocked. Check for clean air filters, vents, and registers. Make sure there are no rugs or furniture blocking vents or registers as well.
Most furnaces will default to just running the blower if it senses a malfunction. Furnaces have an array of sensors that will detect overheating and automatically shut off the heating element if it senses a possible safety problem. This is why you will experience your furnace “running” but not heating.
Read on to learn three signs of a clogged furnace flue:
  • Excessive Soot. When you notice excessive soot around your furnace flue, it might indicate inefficiency that requires a call for maintenance
  • Water Streaking the Furnace Wall
  • Yellow Flame
The most common problems with furnaces are:
  • Dirty ductwork.
  • Old filters.
  • Faulty starting mechanism.