Plumbing problems can be inconvenient and even dangerous for homeowners. To avoid costly repairs and damage to your home’s structure, property owners must identify and fix plumbing issues as soon as possible. Unfortunately, plumbing issues tend to crop up when we least expect them. At any time, something could go wrong with your plumbing system and cause an emergency situation. For example, pipes might freeze in cold weather, or leaks could occur because of faulty pipes or appliances. These are just two examples of common and often-annoying culprits behind plumbing issues. However, there are many other lesser-known culprits that could cause similar problems. If you experience plumbing issues in your home, make sure to take the time to identify the cause to ensure they don’t reoccur in the future.

Frozen pipes

Frozen pipes are one of the most common plumbing problems, particularly during the winter months. When the temperature drops below freezing, water in exposed pipes turns into ice, which can expand and break the pipes. The resulting cracks can eventually lead to leaking and water damage, so it’s important to keep an eye on your pipes to avoid a frozen mess. In order to prevent this problem from happening, be sure to insulate exposed pipes, and if possible, cover them with a layer of insulation. You can also purchase a heated blanket for the exterior of your home. Even if the temperature doesn’t drop below freezing, frozen pipes can still cause damage. If left untreated, frozen pipes can burst and cause major damage to your home’s structure.

Leaking pipes

Another major plumbing problem is leaking pipes. While frozen pipes are typically a result of freezing weather, leaking pipes are more likely to occur in warm weather, particularly if you live in a place with a high humidity level. Leaking pipes can be caused by a variety of factors, including tree roots growing into the pipes, frozen pipes expanding and causing leaks, or faulty pipes that have been damaged by age or wear and tear. You should always be on the lookout for leaks, particularly if you live in an area with high humidity. If you notice a drop in water pressure, or if it takes longer to fill a bucket from the faucet, you may have a leaking pipe. If you notice a drip or drop of water, or if you see a puddle form under your sink, it is likely a leaking pipe. If you notice a drip, drop, or puddle of water, you should shut off the water supply to the affected area immediately to avoid further damage.

Blocked drains

One of the most common and preventable plumbing issues is a clogged drain. It’s important to keep drains clear so they don’t back up, which is an inconvenience and can even cause damage to your home. One of the most common reasons for clogged drains is food waste. Food scraps left in the sink or toilet can lead to a build-up of waste and cause a clog. You can reduce the amount of food scraps in your drains by installing a garbage disposal. However, even with a garbage disposal, it’s important to clear the drain once or twice a week to keep it free and clear of clogs. Another common cause of clogged drains is hair, which can become trapped in the pipes, particularly in homes with pets. Hair can also result in a build-up of dirt and debris in the pipes, which can cause a clog. You can reduce your risk of clogged drains by combing hair and removing pet hair from your clothing before washing them.

Pipe bursts

Another major plumbing emergency is a pipe burst. Pipes may be damaged by hydrostatic pressure, or they may develop a crack that is left unattended. If a pipe has a crack that will eventually lead to a burst, it’s crucial that you repair it as soon as possible. A pipe burst can be dangerous and cause a lot of damage to your home and surrounding property. If you notice a pipe that appears to have been damaged, or if you notice a drop in water pressure, you should contact a plumber as soon as possible. Pipe bursts are a difficult problem to prevent, but they can be avoided by keeping an eye on your pipes and making sure they are properly installed. You should also be aware of the signs of a pipe that is about to burst. These signs include loud noises coming from the pipes, a strong smell of rotten eggs or sewage, or an unusually wet floor or wall. If you notice any of these signs, you should immediately contact a plumber.

Toilet problems

Toilet problems are one of the most common plumbing issues, with some homes experiencing as many as five issues each year. Toilet problems can be particularly annoying and inconvenient, as they are almost always accompanied by a loud bang or two. Many of the issues associated with toilets can be prevented by following a few simple tips. You can avoid clogged toilets by installing a toilet bowl brush and a plunger in each toilet, and you can prevent back-ups by installing a clear-weave or sand-fill trap in your sewer line. You can also reduce the amount of time that your toilet is in use by installing a low-flush toilet. If you experience toilet issues, it’s a good idea to contact a plumber. If you notice a problem with your toilet, such as a leaking toilet, you should shut off the water supply as soon as possible.

Finding the cause of your plumbing issues

Once you’ve identified that you have a plumbing problem, the next step is to identify the cause. It’s important to follow proper procedure when identifying the cause of a plumbing issue so you can avoid future problems. For example, if you have a pipe that is leaking, you should turn off the water supply to the affected area before you attempt to fix it. Doing this will help to prevent further damage, and it will also help to reduce the risk of water damage to your home. Once you’ve identified the cause of the problem, you should be able to fix it. There are many DIY solutions to common plumbing problems, but it is recommended to contact a plumber if you feel inexperienced or uncomfortable tackling the task. If you do decide to tackle the job yourself, make sure to follow proper safety procedures to avoid injury or damage to your home or property. Finally, if you experience a plumbing issue, don’t ignore it. If you don’t take action, the problem will only get worse. This means that you will likely need to spend a lot of money on repairs, so it’s important to take action as soon as possible.

Frequently Asked Question

  • Give your pipes a good cleaning once a month. Hair, grease, and other gunk build up in drains over time
  • Fix recurring problems
  • Block debris from entering pipes
  • Flush your drains regularly
  • Don't dump grease down the drain
  • Give your garbage disposal a rest
  • Don't throw things down the toilet
It's always a good idea to take care of your plumbing before a problem happens because a plumbing problem can turn into an emergency very quickly. You should have your plumbing pipes cleaned every 18 to 22 months or so.
The most common plumbing problems are clogged drains and toilets, leaky faucets and pipes, water heater issues, low water pressure, and a running toilet.
A good general rule is to have your home's sewer lines cleaned out every 18 to 22 months. That may be difficult to remember, but think of it as a year and a half to slightly less than two years.
One of the most common issues with a heating system not functioning is dirty air filters. If your air filters are extremely dirty, then the airflow can be blocked. Check for clean air filters, vents, and registers. Make sure there are no rugs or furniture blocking vents or registers as well.
Most furnaces will default to just running the blower if it senses a malfunction. Furnaces have an array of sensors that will detect overheating and automatically shut off the heating element if it senses a possible safety problem. This is why you will experience your furnace “running” but not heating.
Read on to learn three signs of a clogged furnace flue:
  • Excessive Soot. When you notice excessive soot around your furnace flue, it might indicate inefficiency that requires a call for maintenance
  • Water Streaking the Furnace Wall
  • Yellow Flame
The most common problems with furnaces are:
  • Dirty ductwork.
  • Old filters.
  • Faulty starting mechanism.